D-GUARD FENDERS
MODEL 114D DESIGN SPECIFICATIONS
Features
• More economical, durable and practical than virgin rubber products
• Nylon-reinforced rubber D-guard sections are compressed onto steel rods and secured with heavy-duty flatbar or angle
• Weld-tabs are compressed onto steel rods at 12” intervals and are welded directly to the hull
• No need to incur costs associated with pinning extruded rubber into channel
• Each weld-tab floats and works independent of other weld-tabs, thereby providing quick installation on irregular and damaged hulls
• Rubber is tapered at ends to provide tight joint when two or more units are used
• Tough plies of nylon-reinforced rubber virtually eliminate chipping, unlike extruded and molded rubber
• 100% of rubber contents is certified to be recycled from post-consumer waste
• Pre-curved sections available
Standard Sizes
• Schuyler manufactures D-Guard Fenders with or with out a cylindrical or D-shaped bore. The variable size and shape of the bore, if required, will give you the specific physical characteristics needed
• Standard sizes are noted in chart. Please specify size of bore, if required, when ordering. Also note that Schuyler has the capability to manufacture non- standard D-Guard sizes
Description
| 1-1/4” RODS PART NO. | A | B | C | WT. (Lbs per Linear Ft.) |
|---|---|---|---|---|
| SR114D 0606 | 6” | 6” | 12” to 240” |
25 |
| SR114D 0609 | 6” | 9” | 36 | |
| SR114D 0707 | 7” | 7” | 33 | |
| SR114D 0808 | 8” | 8” | 40 | |
| SR114D 0810 | 8” | 10” | 44 | |
| SR114D 0909 | 9” | 9” | 45 | |
| SR114D 1010 | 10” | 10” | 50 |
| 3/4” RODS PART NO. | A | B | C | WT. (Lbs per Linear Ft.) |
|---|---|---|---|---|
| SR114D 0404 | 4” | 4” | 12” to 240” |
10 |
| SR114D 0405 | 4” | 5” | 11 | |
| SR114D 0406 | 4” | 6” | 14 | |
| SR114D 0408 | 4” | 8” | 20 | |
| SR114D 0410 | 4” | 10” | 26 | |
| SR114D 4510 | 4.5” | 10” | 27 | |
| SR114D 4512 | 4.5” | 12” | 32 | |
| SR114D 0606 | 6” | 6” | 23 | |
| SR114D 0610 | 6” | 10” | 36 | |
| SR114D 0612 | 6” | 12” | 38 |
None.
None.
