3326 NORMALLY CLOSED ADJUSTABLE AIR PILOT RELAY VALVE 1/4” NPT

DESCRIPTION

The 3326 is a poppet-type, normally closed relay valve. The spring keeps this valve in a closed position. The supply line is blocked and the outgoing line is vented through the exhaust port. When air pressure enters the pilot port, the main spring is compressed. This will permit the supply air to flow through the out port and close the port to exhaust. Several spring ratings are available, up to 120 PSI. The valve lends itself extremely well for inter-locking and time-delay circuitry. Its all bronze and stainless steel construction will give many years of trouble-free service. This valve has a full flow, 1/4” capacity, without restrictions.

An optional inlet cap is available which is equipped with an adjustable flow control that permits the volume regulation of the supply air.

SPECIFICATIONS

Weight: 2.4 lbs. (1.09 kg)
Materials: Die-cast silicon bronze and stainless steel hardware
Maximum Supply Pressure: 200 PSI (13.79 BAR)
Maximum Pilot Pressure: 700 PSI (48 BAR)
Operating Temperature Range: -40ºC to +90ºC
Pipe Port Size: 1/4” NPT

ORDERING INFORMATION

Model Designation Order Codes:

A – Standard inlet cap
B – With flow control inlet cap
C – Heavy spring (40-120 PSI range)
D – Light spring (25-60 PSI range)
DD – Extra light spring (10-20 PSI range)
E – Left hand model (as shown in drawing)
F – Right hand model

The Standard Model 3326 Relay Valve is supplied as follows:

1. Standard inlet cap
2. Heavy spring (40-120 PSI range)
3. Left or right hand model

To order, state Model Number, followed by desired Model Designation Order Codes listed above.

Example: To order a 3326 standard left hand model. Order No. 3326-ACE.