MODEL 2046 MEDIUM-DUTY SINGLE-LEVER CONTROL HEAD

DESCRIPTION

The 2046 control head was made for a marine environment and to give the boat owner years of trouble-free service. Its compact and rugged design exceeds any competitive product in value and performance. The control handle will engage the gear in either direction before throttle acceleration takes place. In order to warm up the engine without gear engagement, the control handle is pulled away from the dome approximately 1/4”. This will disengage the clutch mechanism and will allow engine acceleration. When the control handle is returned to the neutral position, the clutch mechanism is automatically engaged. The control head also provides a small detent in the full throttle position in one direction only (forward). This will prevent the engine from creeping back, causing loss of RPM. By reversing the detent roller and spring assembly, the full speed detent can also be reversed.

SPECIFICATIONS

Weight: 7.5 lbs. (3.4 kg)

ORDERING INFORMATION
Model Designation Order Codes:

H – With one neutral safety switch
K – With chrome finish cover and handle
L – With satin brass finish cover and handle
M – With black epoxy finish cover with chrome handle

The Standard Model 2046 Control Head is supplied as follows:

1. With chrome finish handle and cover
2. Without neutral safety switch

To order, state Model Number, followed by desired Model Designation Order Codes listed above.

Example: A standard model 2046 Control Head with chrome finish. Order No. 2046-K.

NOTES:
* Plastic labels are available to indicate Neutral, Forward and Reverse positions, as well as speed scales. Order Part No. 2046-0015.
* Cable connector kits are ordered separately. Each push pull cable end attached to the control head requires one kit.

CONNECTION KIT ORDERING INFORMATION

2046-0901 No. 10-32 (30 series cable) Connection Kit
2046-0902 1/4”-28 (40 series cable) Connection Kit
2046-0903 Neutral Safety Switch Kit