MODEL 7168 RUDDER ANGLE FEEDBACK UNIT
DESCRIPTION
This small version of a rudder angle feedback unit, with its all bronze and stainless steel construction, is available with one or two potentiometers. Its compact design and watertight construction will allow it to be installed in very tight quarters. Because of the non-corrosive construction, it is intended for a saltwater environment. Its uses are to give a rudder angle position feedback signal to an autopilot, angle indicator or electronic steering components.
ORDERING INFORMATION
7168-P 1 Potentiometer
7168-PP 2 Potentiometers
Standard potentiometers are 1K.
3 Pillars also available. Order Part No. 7168-1001.
Model 7174 (not shown)
Rudder Angle Feedback Unit is available with up to 3 potentiometers, 3 trim pots, and 4 microswitches.
Description
|
ITEM |
QUANTITY |
PART NO. |
DESCRIPTION |
|---|---|---|---|
|
1 |
1 |
7168-0001 |
Frame |
|
2 |
1 |
7168-0002 |
Cover |
|
3 |
1 |
7168-0003 |
Plate |
|
4 |
1 |
7168-0004 |
Gasket |
|
5 |
1 |
7168-0005 |
Bushing |
|
6 |
1 |
7168-0006 |
Shaft |
|
7 |
3 |
7174-0008 |
Spacer |
|
8 |
1 |
6001-0248 |
Gland |
|
9 |
1 |
7170-0010 |
Spur Gear |
|
10 |
1 |
Y-3216 |
Gear |
|
11 |
1 |
2104-0006 |
Lever |
|
12 |
1 |
6657-1-102 |
Potentiometer |
|
13 |
3 |
1002-0822 |
Hex Socket Head Cap Screw |
|
14 |
1 |
1016-0804 |
Hex Socket Set Screw |
|
15 |
1 |
1016-0602 |
Hex Socket Set Screw |
|
16 |
1 |
1001-0814 |
Hex Head Cap Screw |
|
17 |
4 |
1010-0806 |
Round Phillips Head Machine Screw |
|
18 |
2 |
1024-1512 |
Spring Pin |
ALL DIMENSIONS SHOWN IN INCHES (mm.)
None.
None.
