STARFIRE® STROBE WARNING LIGHT
MODEL 131ST AND 131DST
Federal Signal’s Starfire® strobe warning lights are available in single-flash (131ST) and double-flash (131DST) models. Through precise timing of the strobe flash, the double flash unit produces 1,200 effective candlepower; the single flash unit produces 1,000 effective candlepower.
Starfire models are available in 12-24VDC, 120VAC (50/60Hz) and 240VAC (50/60Hz). All units are less than nine inches high and six inches in diameter, but powerfully effective.
Starfire strobe warning lights contain their own strobe power supply in the base of the light. The strobe flash tube is mounted in an eight-pin octal socket base. The fresnel dome stands up to impact and abuse and is available in amber, blue, clear, green and red. The base of the light is made of corrosion-resistant anodized aluminum. Each Starfire model comes with a standard 1/2-inch pipe mount. An optional magnetic mount or surface mount can be ordered.
Because of its convenient size and intense light output, the Starfire strobes can be used for multiple applications. Excellent for in-plant use, the Models 131ST/DST warn of hazardous conditions, mark dangerous areas (either permanently or temporarily) and mounts on lift trucks, cranes and other moving devices. By using the magnetic mounting kit, these powerful strobes can be used on emergency, utility, maintenance or any other vehicle requiring temporary emergency warning.
• Available in 12-24VDC, 120VAC and 240VAC
• Five dome colors
• 10,000 hour strobe tube
• Single or double flash strobe
• 1/2-inch pipe mount or optional magnetic mount
• UL and cUL Listed, CSA Certified for indoor/outdoor use
• Type 3R, IP45 enclosure
Description
|
Model |
Voltage |
Operating Current |
Flash Rate/ Minute |
Candlepower Peak1 |
ECP2 |
Mount4 |
|
|---|---|---|---|---|---|---|---|
|
131DST |
12-24VDC |
3.0-1.9 amps |
803 |
1,000,000 |
1,200 |
1/2″ |
Pipe |
|
131DST |
120VAC |
0.60 amps |
803 |
1,000,000 |
1,200 |
1/2″ |
Pipe |
|
131DST |
240VAC |
0.30 amps |
803 |
1,000,000 |
1,200 |
1/2″ |
Pipe |
|
131ST |
12-24VDC |
2.75-1.25 amps |
80 |
2,000,000 |
1,000 |
1/2″ Pipe |
|
|
131ST |
120VAC 50/60Hz |
0.60 amps |
80 |
2,000,000 |
1,000 |
1/2″ Pipe |
|
|
131ST |
240VAC 50/60Hz |
0.30 amps |
80 |
2,000,000 |
1,000 |
1/2″ Pipe |
|
|
1Peak candlepower is the maximum light intensity generated by a flashing light during its light pulse 2ECP (Effective Candle power) is the intensity that would appear to an observer if the light were burning steadily 3Double Flash 4Magnet and surface mount kits available |
|||||||
