PROMAX INTREPID/NM
FEATURES
- Fluorescent system provides energy savings up to 50% when compared to HID.
- Third party certified for operation in high ambient temperatures, up to 65.C (149.F).
- Multi voltage electronic ballast resistant to brownouts or voltage and frequency fluctuations.
- Stainless steel latches, mounting feet and lens retainers.
- Impact resistant, UV stabilized polycarbonate lens.
- Shoc•Loc™ Bi-Pin spring loaded lamp holders for T5, T8 and T12 lamp types, provide superior resistance to shock and vibration.
- USDA compliant materials.
- Meets Canadian Processed Products Regulations C.R.C. c291.
- Neoprene gasket resists petroleum.
- Three lamp models are provided with (1) single lamp ballast and (1) two lamp ballast for independent switching or filter tube options.
- Optional self contained emergency battery backup ballasts.
- Optional long life T5 lamps available upon request (consult factory)
Ordering:
See Common Orders below
*For T5 & T5HO, EM Ballast is fixed voltage, 120 or 277v, 50/60Hz.
**Lamps are not included unless option “L“ or “LL” is specified.
***Not available in 24w, 35w, 54w or 60w.
Description
APPLICATIONS
- Marine and watertight requirements
- Dusttight requirements
- Waste water treatment plants
- Food & beverage processing facilities
- Pulp and paper production plants
- Corrosive environments
APPROVALS
- Type 4X
- IP66
- Marine Outside Type Saltwater
- ABS
- NSF
STANDARDS
- UL 1598A – Luminaires for Marine Vessels
- UL 924 – Emergency Lighting Equipment
- EN 60529 – Ingress Protection
- Canadian Processed Products Regulations C.R.C. c291
- CSA – C22.2 250 04
- CSA – C22.2 141
- NSF/ANSI 2-2007 Splash Zone
TECHNICAL SPECIFICATIONS
HOUSING
.080 inch thick minimum, fiberglass reinforced polyester.
LENS
0.090 inch thick, matte polycarbonate. Optional clear polycarbonate.
REFLECTOR
Type 5052H32 aluminum with an electrostatically applied white polyester powder coat finish. Minimum 90% reflectance.
GASKET
One piece neoprene.
MOUNTING
Stainless steel vibration dampening feet for ceiling, wall or chain mount. Kits available for uni-strut/rod and pole mount.
LATCHES
Stainless steel over the center cam.
LAMP HOLDERS
Spring loaded on one end for linear lamp types.
ENTRIES
Feed-through, one nonmetallic cable gland and one end plugged. See Special Options for other entries.
LAMP TYPES
See ORDERING REFERENCES. Lamps not provided.
BALLAST
120 to 277 volt 50/60Hz electronic, except F20 & F40 T12 Bi-Pin which are 120V 60Hz.
| Lamp Wattage | Ballast/Socket type | ANSI Lamp Code | Starting temp | Maximum Ambient* | Supply Wire |
|---|---|---|---|---|---|
| 17 | T8 Bi-Pin G13 | F17-T8 | 0ºF / -18ºC | 55˚C | 90ºC |
| 32 | T8 Bi-Pin G13 | F32-T8 | -20ºF / -29ºC | 55˚C | 90ºC |
| 40 | 4 Pin 2G11 | FT40 CF | 0ºF / -18ºC | 40˚C | 90ºC |
| 24/54 | T5HO Mini Bi-Pin G5 | F24/F54-T5HO | -20ºF / -29ºC | 55˚C | 90ºC |
| 14/28 | T5 Mini Bi-Pin G5 | F14/F28-T5 | 0ºF / -18ºC | 55˚C | 90ºC |
| 35/60 | T12HO RDC R17d | F24/F48-T12HO | -20ºF / -29ºC | 40˚C | 90ºC |
*Consult factory for optional higher ambient models.
EMERGENCY BATTERY BACKUP BALLAST
Optional, self contained 90 minute minimum for all lamp types. 120 minutes minimum for F32T8 one lamp. Starting temperature 32.F/0.C.
Dimensions
| Dimensions in Inches / Centimeters | Nominal | |||||
|---|---|---|---|---|---|---|
| Monimal Length | A | B | C | Carton WxDxL Inches | Lbs | Kg |
| 2 Foot | 28.8 / 73.7 | 12.44 / 31.59 | 7.625 / 19.4 | 83⁄4 x 61⁄4 x 317⁄8 | 9 | 4 |
| 4 Foot | 52.8 / 134.6 | 36.56 / 92.87 | 7.625 / 19.4 | 81⁄2 x 6 x 561⁄16 | 17 | 7.7 |
Mounting Options
Commonly Ordered Luminaires
| Part No. | Description | Weight lbs | Weight Kg |
|---|---|---|---|
| FPS217 | Fiberglass reinforced polyester 2 foot fixture 2 x F17 120-277v 50/60 Hz | 9 | 4 |
| FPS220 | Fiberglass reinforced polyester 2 foot fixture 2 x F20 120v 60 Hz | 10.1 | 4.6 |
| FPS232 | Fiberglass reinforced polyester 4 foot fixture 2 x F32 120-277v 50/60 Hz | 17 | 7.7 |
| FPS240 | Fiberglass reinforced polyester 4 foot fixture 2 x F40/F34 120v 60 Hz | 18 | 8.2 |
| FPS260 | Fiberglass reinforced polyester 4 foot fixture 2 x F48 120-277v 50/60 Hz | 18.5 | 8.4 |
| FPS317 | Fiberglass reinforced polyester 2 foot fixture 3 x F17 120-277v 50/60 Hz | 11.8 | 5.4 |
| FPS320 | Fiberglass reinforced polyester 2 foot fixture 3 x F20 120v 60 Hz | 13.9 | 6.3 |
| FPS332 | Fiberglass reinforced polyester 4 foot fixture 3 x F32 120-277v 50/60 Hz | 19.8 | 9 |
| FPS340 | Fiberglass reinforced polyester 4 foot fixture 3 x F40/F34 120v 60 Hz | 21.8 | 9.9 |
| FX2175 | Matte Polycarbonate Lens with Gasket 2 foot | 1.5 | 0.68 |
| FX2177 | Matte Polycarbonate Lens with Gasket 4 foot | 2.7 | 1.22 |
| FX2163 | Clear Polycarbonate Lens with Gasket 2 foot | 1.5 | 0.68 |
| FX2165 | Clear Polycarbonate Lens with Gasket 4 foot | 2.7 | 1.22 |
| FX8014A | Latches | 0.1 | 0.05 |
