LFA-S – HIGH LEVEL & OVERFILL LIQUID LEVEL ALARM SENSORS 8” FLG SS
HIGH LEVEL & OVERFILL LIQUID LEVEL ALARM SENSORS, 8” FLG, SS
The LFA-S High Level/Overfill Liquid Level Sensor is USCG accepted and satisfies 46CFR 39.2009 (a) 2 requirements as part of your barge Overfill Prevention System when installed in accordance with 46CFR 111.105 for Hazardous Locations. UL FILE E540290
All stainless steel construction for mounting on a STD 8” flanged spool piece, typically 6”H. The 316SS float is rated for pressure up to 120 PSI, and for light Cargo Viscosity down to 0.6 SG! The Timco buoyant float design insures there is little to no Alarm Set Point variance with different SG Cargoes. Our UL Listed Hermetically Sealed NC latching Reed Switch provides long life and is interchangeable with all Level alarm sensors.
Intuitive Lift to Test Rod with rod seal and weather cover make it easy for Tankermen to test prior to every loading as required. The large SS weathertight junction box with Nickle plated Brass wire grip seals out moisture extending switch service life. Tested, serialized, with HL/OF Setting clearly stamped into the flange data tag, expect years of trouble free service and safety with the LFA-S on your barge.
In stock
Description
LFA-S High-Level and Overfill Alarm Sensor — 8-Inch Flange
The LFA-S barge overfill alarm sensor provides high-level and overfill liquid level detection. It is USCG accepted and satisfies the requirements of 46 CFR 39.2009(a)(2) as part of a barge overfill prevention system when installed in accordance with 46 CFR 111.105 for hazardous locations.
UL File E540290
Construction and Mounting
The sensor features stainless steel construction and mounts on a standard 8-inch flanged spool piece, typically 6 inches high. The 316 stainless steel float is rated for pressures up to 120 PSI and cargoes with a specific gravity as low as 0.6.
The TIMCO buoyant float design minimizes alarm setpoint variation between cargoes with different specific gravities. The UL Listed, hermetically sealed, normally closed (NC) latching reed switch provides long service life.
Manual Testing and Identification
A manual lift-to-test rod with a rod seal and weather cover allows tankermen to test the sensor before loading. The large stainless steel weathertight junction box includes a nickel-plated brass wire grip to help keep moisture out.
Each LFA-S sensor is tested and serialized, with its high-level and overfill settings clearly stamped on the flange data tag.
Product Documents
Stainless steel construction insures extended service life.
Premium float magnets are tested and matched to a UL Approved Reed Switches for long term reliable operation.
Each sensor is 100% operationally tested prior to shipment.
The LFA-S bolts to standard 5” 150 lb. class mounting flange which is 11.0” diameter and has (8) 0.88” diameter bolt hole on a 9.5”



Related Products
-
PORTABLE HL/OF-1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
DF-430 FLUSH WATERTIGHT T-HANDLE HATCH
Add to Quote This product has multiple variants. The options may be chosen on the product page













