ANCHOR WINCHES

Model No. DF-AW-1200-30-2/16H

SPECIFY THE FOLLOWING INFORMATION  TO DETERMINE THE SIZE AND SPEED OF YOUR ANCHOR WINCH:

CABLE SIZE                                ______________
DRUM CAPACITY                     ______________
LINE PULL (FIRST LAYER)   ______________
LINE SPEED                               ______________
MOTOR TYPE                            ______________
# OF GYPSY HEADS                ______________
GYPSY HEAD SIZE                  ______________

MODEL SHOWN

MODEL                                       DF-AW-1200-30-2/16H
CABLE SIZE                               1-7/8 Inch
DRUM CAPACITY                     1200 Ft.
LINE PULL (FIRST LAYER)   25,000 Lbs. @ 2400 PSI
LINE SPEED                               30 FPM
MOTOR TYPE                            HYDRAULIC
# OF GYPSY HEADS                TWO
GYPSY HEAD SIZE                   16 INCH

  • Hydraulic or electric motor with fail safe motor brake
  • 4-way control valve mounted and piped on the winch
  • Manually operated band brake with stainless steel brake and steel hand wheel
  • Lever operated machined jaw clutch
  • Wire rope level wind for uniform lay or wire on the drum
  • Ratchet and pawl type holding dog on the drum
  • Fabricated steel construction
  • Three coat zinc and epoxy paint system
  • Electric or hydraulic power
  • Jaw clutched drum
  • Single or double warping heads
  • Hydraulic motor with fail safe motor brake
  • Spur gear reduction operating in oil bath
  • Level wind available
  • Drum band brake and holding dog
  • Drum capacity and line pull to meet customer requirements
  • Other sizes and features available
  • Other available offshore deck machinery:  mooring winches, towing winches, anchors, chain and capstans
  • Contact NABRICO with your specific requirements
Category: