SPUR-GEAR SERIES
2 AND 5 TON US WINCHING CAPACITY
Model No. LM6 / LM6W / LM10 / LM10W / LM16 / LM16W / HM8 / HM8W / HM12 / HM12W / HM16 / HM16W / HM24 / HM24W
The LM & HM Series “All Steel” hand winches* are designed for marine duty and industrial use.
Optional disc brake handle incorporates a “Weston” style load brake to automatically hold the rated load in lifting operations.
Standard Features:
- Cast steel drums and ring gear
- Steel load-bearing components, cast steel frames
- Replaceable bronze bushings
- One-piece, fully adjustable 14”-long steel operating handle with pinion
- Spring-loaded holding dog with release handle
- Hand-operated, adjustable holding brake
- Easy free spooling
- Two-speed gear change offers fast cable take up and easier winching
*NOTE: Not recommended for power winching operation.
Description
| OPTIONS & ACCESSORIES | ||
|---|---|---|
| DESCRIPTION | LM | HM |
| 28″ Diameter Handwheel | 1580-2 | 1580-1 |
| Hand Wheel for Units with Disc Brake Handle (SBH) | 3628 | 3628 |
| Extended Shaft Pinion (1-7/16″ X 12″) | 2833 | 991 |
| Power Drive Pinion** | 1942 | 1948 |
| Gear Covers | 250-B | 249 |
| Disc Brake Handle | 3679 | 3677 |
| Marine 812 Top Coat | ||
| Reverse Dog Assembly | ||
| Drum Divider Flange | ||
** WARNING: Accessory drive pinion is intended only for faster cable take-up by power with no load, and should never be used for power-driven winch or hoist operation.
| SPUR GEAR SERIES 2 TON AND 5 TON SPECIFICATIONS | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| MODEL NO.† | CAPACITY 1ST LAYER (US TONS) |
GEAR RATIO | DRUM CAPACITIES | SHIP WT. (lbs.) | |||||
| 1/4″ | 5/16″ | 3/8″ | 7/16″ | 1/2″ | 5/8″ | ||||
| LM6 LM6W |
2 | 4:1/22:1 | 278′ | 180′ | 133′ | 97′ | 66′ | – | 63 69 |
| LM10 LM10W | 2 | 4:1/22:1 | 464′ | 300′ | 222′ | 161′ | 111′ | – | 77 88 |
| LM16 LM16W | 2 | 4:1/22:1 | 742′ | 480′ | 355′ | 257′ | 177′ | – | 93 104 |
| HM8 HM8W |
5 | 4:1/24:1 | – | – | 358′ | 284′ | 220′ | 123′ | 123 135 |
| HM12 HM12W | 5 | 4:1/24:1 | – | – | 537′ | 425′ | 330′ | 185′ | 131 151 |
| HM16 HM16W | 5 | 4:1/24:1 | – | – | 716′ | 566′ | 440′ | 247′ | 142 166 |
| HM24 HM24W | 5 | 4:1/24:1 | – | – | 1075′ | 850′ | 660′ | 371′ | 163 174 |
†“W” at the end of the model no. indicates unit is equipped with a handwheel. Allow 19 additional lbs. for handwheel.
WARNING: Before installation, see maintenance and operations manual for additional warnings and precautions. This equipment is not to be used for lifting, supporting or transporting people, or lifting or supporting loads over people.
| SPUR GEAR SERIES 2 AND 5 TON SPECIFICATIONS | |||||
|---|---|---|---|---|---|
| MODEL NO. | A | B | C | D | E |
| LM6 LM6W |
6″ | 5-7/8″ | 10-3/4″ | 12-1/4″ | 14″ |
| LM10 LM10W |
10″ | 7-3/4″ | 14-5/8″ | 16-1/4″ | 18″ |
| LM16 LM16W |
16″ | 10-3/4″ | 20-5/8″ | 22-1/4″ | 24″ |
| HMB HMBW |
8″ | 7-7/8″ | 13-7/8″ | 15-3/8″ | 17-3/4″ |
| HM12 HM12W |
12″ | 9-1/4″ | 17-3/4″ | 19-1/4″ | 21-1/4″ |
| HM16 HM16W |
16″ | 11-1/2″ | 22-1/4″ | 23-3/4″ | 25-3/4″ |
| HM24 HM24W |
24″ | 16-3/4″ | 30-1/4″ | 31-7/8″ | 33-3/4″ |
NOTE: Dimensions are subject to change. Please contact factory for certified prints.
None.
