WORM GEAR POWER WINCHES
4WP2 / 4WP2T8 / 4WP2TC
Up to 2000 lb. capacity
- 115 Volt Single Phase Electric Motor includes power cord with grounded plug and a momentary contact-type push button pendant control on a control cord.
- Machine Cut Worm Gears provide accurate operation and long lasting service.
- Enclosed Oil Bath provides continuous lubrication of gears to minimize wear. Oil seals keep oil in and dirt out.
- Internal Mechanical Brake provides positive load control for lifting and lowering operations.
- Ball Bearings and self-aligning bronze bearings provide smooth and efficient operation.
- Pressure Plate on series 4WP2T8 only, applies pressure to drum and wire rope to help maintain uniform winding.
- Dual Function Cable Anchor for quick disconnect of wire rope with swaged ball fitting, or recessed cable anchor with set screw for wire rope with unfinished end.
- Mounting Options include floor, wall, or ceiling.
- Two-year Limited Warranty
- Cast Aluminum construction, for lightweight strength.
- Corrosion Resistant durable paint finish protects against corrosion in harsh environments.
- Large Diameter Drums minimize wear to the wire rope and help extend its life.
- Clutch Model allows operator to manually disengage the drum to rapidly unwind wire rope. Clutch models do not include pressure plates.
Description
Series 4WP2 and 4WP2T8 – Performance Characteristics
| LOAD RATING (LB.) | LINE SPEED (FPM) | DRUM CAPACITY (FT)1 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SERIES | DESCRIPTION | MOTOR HP | AMPS FULL LOAD | 1ST LAYER | MID DRUM | FULL DRUM | WIRE ROPE DIA. (IN) | 1ST LAYER | MID DRUM | 1ST LAYER | MID DRUM | FULL DRUM | APPROX SHIP WT. (LB.) |
| 4WP22 | includes controls | 1.3 | 16 | 2000 | 1200 | 1200 | 1/4 | 8 | 13 | 11 | 35 | 77 | 85 |
| 4WP2T8-2000-84 | includes controls | 1.3 | 16 | 2000 | 1200 | 800 | 1/4 | 8 | 19 | 19 | 130 | 280 | 101 |
| ATLAS winch – 5.5″ drum – for pulling or lifting | 5/16 | 8 | 19 | 15 | 85 | 190 | |||||||
| 4WP2TC-2000-84 | includes controls | 1.3 | 16 | 2000 | 1200 | 800 | 1/4 | 8 | 19 | 12 | 87 | 190 | 106 |
| clutch model – 5.5″ drum – for horizontal pulling only | |||||||||||||
| Motor Options – standard motor is 115/1/60 VAC TEFC, for other configurations add motor code to model number when ordering. | |
|---|---|
| Example: 4WP2T8-2000-8-PN (pneumatic winch) | |
| A5 | 115 volt 1 phase – no controls or power cord – TENV |
| B5 | 230 volt 1 phase – no controls or power cord – TEFC |
| D5 | 230 volt 3 phase – no controls or power cord – TEFC |
| E5 | 460 volt 3 phase – no controls or power cord – TEFC |
| F | all other voltages or hertz |
| PN | 8-vane air motor w/controls (mounted) |
Options & Accessories
| MODEL | DESCRIPTION | APPROX. SHIP WT. |
|---|---|---|
| EL1CS7 | NEMA 1 control switch – mounted and wired | 3 lb. |
| EL1CSW7 | NEMA 4 watertight control switch – mounted and wired | 7 lb. |
| TPL-4WP2 | Two Part Line Kit – not available for 4WP2 Series | 4 lb. |
1 Actual drum capacities may be 25-30% less, due to nonuniform winding. Tension in wire rope will also affect drum capacity.
2 Model 4WP2, 115 VAC motor includes 8 ft power cord with grounded plug, and push button pendant control on 6 ft cord.
3 Please contact TIMCOfor firm fixed price and delivery.
4 For 4WP2T8 & 4WP2TC, 115 VAC motor includes 16 ft power cord with grounded plug, and push button pendant control on 16 ft cord.
5 Controls are sold separately for all non-standard electric motors (A, B, D, and E).
6 Please contact TIMCO for firm fixed price and delivery.
7 Controls for 115 volt, single phase, 60 cycle include an 8 ft power
cord with grounded plug.
