View cart “CONTROLAIR VALVE MODEL HD-2-FX” has been added to your cart.
main
dia1dia2dia3

2545 TWIN DUAL-FUNCTION CONTROL HEAD 1/8” NPT

DESCRIPTION

The 2545 control is designed for twin-engine, single-lever clutch and throttle control. Its all bronze and stainless steel construction gives years of trouble-free service in a marine environment.

It basically consists of two single engine controls under one cover. Movement of either one of the handles through 20˚ from the center position actuates one of the 3-way valves, delivering full supply pressure to its corresponding output port. Moving the handle beyond 20˚ actuates an accurate pressure regulating valve. The output of this valve is proportional to the handle movement, therefore giving precise control over the engine speed setting device.

Weight: 19.9 lbs. (9.1 kg)
Materials: Die-cast silicon bronze and stainless steel
Operating Temperature Range: -40ºC to +90ºC
Pipe Port Size: 1/8” NPT (Outputs)  1/4” NPT (Supply)
Maximum Supply Pressure: 150 PSI (10.3 BAR)

APPLICATIONS

• Used principally for the control of twin engines and twin clutches by two dual-function handles.
• Used whenever two sets of directional and proportional pneumatic controls are required.

Description

ORDERING INFORMATION

Model Designation Order Codes:

CC – Two short handle (standard)
DD – One long handle
E – Spring return handles
V – Handles with plastic grip
H – Chrome finish dome
J – Polished brass finish dome and handle
K – Black epoxy finish dome and chrome handle
N – 0-60**
P – 0-80**
R – 0-100**
S – 0-120**
T – 10-60**
U – 10-80**
W – 10-100**
X – 10-120**

**Standard Pressure Ranges (PSI). Other Ranges Available on Request

The Standard Model 2545 Control Head is supplied as follows:

Short handles

1. Chrome finish cover and handles
2. In any standard pressure range

To order, state Model Number, followed by Model Designation Order Codes listed above.

Example: Standard 2545 with 10-80 PSI pressure range.

Order No. 2545-CCHU.

ITEMQTYPART NO.DESCRIPTION
122543-0009Roller
222542-00 11Pin
341029-1031Snap Ring
421005-0808Oval Head Screw
541002-1010Socket Head Screw
622545-0001Roller Arm
741001-0812Hex Head Screw
8101022-0108Nut
921001-1028Hex Head Screw
1022545-0002Spacer
11101101-0010“O” Ring
1241002-1024Socket Head Screw
1323217Air Pressure Regulating Valve •
1422545-0003Cam
1522542-0009Bracket
1612545-0004Dome
1722545-0005Handle (Short)
1722545-0014Handle (Long)
1722545-2005Handle with Plastic Grip (Short)
1722545-2014Handle with Plastic Grip (Long)
1812545-0006Frame
1922544-0005Shoulder Screw
2022545-0008“Fork” Cam
2121002-1040Socket Head Screw
2222545-0009Spacer
2361001-0808Hex Head Screw
2412545-0010Ports Support
2541002-1020Socket Head Screw
2623803-BFour-Way Valve
2722545-0011Plate
28261010-0806Round Head Screw
2941016-1205Set Screw
3021201-0062Spring
3122545-0012Detent Pin
3222545-0021Friction Pad
3321024-0816Spring Pin
3421016-1004Set Screw
3522544-0004Roller
3641023-0232Flat Washer
3712545-0017Gasket (Left Hand)
3821201-0003Spring
3922545-0020Spacer
4041032-0304Rivet
4122545-0013Indicator Strip
4241002-1008Socket Head Screw
4361023-0410Highcollar Washer
4422545-0015Extension
4512545-0018Gasket (Right Hand)
A Repair Kit is available consisting of all seals and gaskets.

Order No. 2545-RK.

ALL DIMENSIONS ARE IN INCHES (mm.)

MODEL 2555 DESCRIPTION

Model 2555 is essentially Model 2545, but it is equipped with illuminated

side scales and with handles having pointers to indicate their position.

None.