TURBINE FUEL FILTERS – 900MA

900MA

Basic Model
90 GPH
Add ’M’ for metal bowl
Example: 900MAM

P

Water Probe
Add ’P’ for an in – bowl water probe.
(Omit if not desired)

10

Element Filtration Rating.
Specify one: ’2’ for 2 micron ’10’ for 10 micron or ’30’ for 30 micron

Category: Controls/Engine Room

Description

Mounting Hole Pattern

Refer to Turbine Series introduction page for filter dimensions

Performance Graphs

These results are from controlled laboratory tests. Field results may vary by application.

Item	Part No.	Description	Case Qty.
1	RK11888	T-handle	1
	11350	T-handle O-ring	10
2	RK11005B	Lid	1
	RK11005B	Lid with Vent Port and Plug Kit (not shown)	1
3	11007	Square-cut Gasket (Lid & Bowl ring)	10
4	2040SMOR	2 Micron Element with Seals	12
	2040TMOR	10 Micron Element with Seals	12
	2040PMOR	30 Micron Element with Seals	12
5	RK19001	Return Tube (w/ tapered pipe body-end threads)	1
	RK19474	Return Tube (w/ straight body-end threads)	1
6	RK11815-101	Body Clamp Bracket	1
7	RK19002	Outer Cylinder	1
8	RK11-1679	Plastic Body Plug	1
9	RK11028B	Check Ball and Seal	10
10	RK11026D	Turbine Centrifuge / Conical Baffle	1
11	RK210691	Water Probe Assembly	1
12	RK20022	Metal Water Probe Port Plug	1
13	RK11341	Bowl Drain Gasket Kit (for New and Old Styles)	10
	11041	Bowl Drain Washer (New and Old Style)	1
14	918-N4	Bowl Plug, 1/4” NPT (New and Old Style)	1
15	RK19492	Diesel Marine Shut-off Valve Kit	1
16	11-1910	Bowl Drain Fitting (New Style)	10
	RK11-1910	Complete Bowl Drain Fitting Kit (New Style)	1
	11040	Bowl Drain Fitting (Old Style)	10
17	11340	Drain Fitting O-ring (New Style)	1
18	RK118682	Heat Deflector Shield (MA)	1
19	RK11-1606-1	Clear Bowl with Water Probe Port	1
	RK11734	Metal Bowl (MAM – not shown)	1
	RK11734-01	Metal Bowl w/ 1/4” NPT Drain & Water Probe Port	1
20	RK11542	Hex/Washer Head Capscrew, 1/4” – 20 x 1” (4)	1
21	RK11037A	Bowl Ring	1
22	RK11-1404	Seal Service Kit (all models – not shown)	1
	19466	Installation Instructions, 900/1000MA

1 For diesel service only. Must be used with a Water Detection Kit.
2 For replacement only. The Coast Guard does not accept “FG” units converted to “MA” configurations.
3 Units built prior to Fall, 1998

Replacement Service Elements

For all Model 900 Series

SERVICE ELEMENT INCLUDES LID SEAL AND T–HANDLE O–RING.

2040SM-OR 2 Micron (Brown end caps)
Recommended for Final/Secondary Filtration

2040TM-OR 10 Micron (Blue end caps)
Recommended for Primary or Secondary Filtration

2040PM-OR 30 Micron (Red end caps)
Recommended for Primary Filtration* Only.

*A secondary/final filter is required downstream.