ELECTRICAL PANEL ACCESSORIES – AC Source Switches
Use as “circuit on” or service indicator light on AC or DC systems. Snap-in panel mount in 5/16″ hole, 6″, 18 AWG leads.
Models:
115/230 VAC Amber*
115/230 VAC Red
115/230 VAC Green
12/24 VDC Red*
12/24 VDC Green
* Standard replacement light for Newmar panels available in skin pack or bulk pack
Description
Standard Switches
| Amperage @ | Number | Switch | Standard Plate | Depth | |
|---|---|---|---|---|---|
| Model | 115/230V | of Poles | Positions | Markings | Dimensions |
| SS-3.0 | 30 | 2 | 2 + “OFF” | SHIP-OFF-SHORE | 2-1/8” |
| SS-7.5 | 63 | 2 | 2 + “OFF” | SHIP-OFF-SHORE | 2-3/8” |
| SS-7.5 INV † | 63 | 2 | 3 + “OFF” | OFF-GEN-INV-SHORE | 3-1/2” |
| SS-15* | 126 | 2 | 2 + “OFF” | SHIP-OFF-SHORE | 4” |
*May be configured as a 63 amp, 4 pole switch
† For vessels with onboard generator and inverter
Mounting Flange Dimensions
All standard switches, plus 63 and 80 amp special order switches. 100 and 125 amp special order switches only.
Special Order Switches
If none of the standard switches listed above meet your requirements, NEWMAR will custom configure an AC selector switch for you. Please allow 2 weeks for shipment. Contact factory for pricing.
1) Determine the following:
A) Amperage/kW rating required
B) Number of switch positions required
C) Number of poles required
2) Use the chart below to determine model number:
| Amperage/kw Rating | 2 Position Plus Off | 3 Position Plus Off | 4 Position Plus Off | |||
|---|---|---|---|---|---|---|
| @ 120 VAC | 2 Pole | 3 Pole | 2 Pole | 3 Pole | 2 Pole | 3 Pole |
| 63 Amp (7.5 kw) | SS-7.5 | S-632 | S-623 | S-633 | S-624 | S-634 |
| 80 Amp (10 kw) | S-822 | S-832 | S-823 | S-833 | S-824 | S-834 |
| 100 Amp (12.5 kw) | S-1022 | S-1032 | S-1023 | S-1033 | S-1024 | S-1034 |
| 125 Amp (15.5 kw) | SS-15 | S-1232 | S-1223 | S-1233 | S-1224 | S-1234 |
3) Select the desired switch selector position labeling from the following list:
| SHORE | GEN PORT | SHORE | PORT GEN |
|---|---|---|---|
| SHORE 1 | GEN 1 | STBD SHORE | STBD GEN |
| SHORE 2 | GEN 2 | INV |
or specify the position labeling you require.
If you have need for a specific arrangement of the switch selector position labels, please mention this at the time of ordering. Note: Combination switches similar to one used in our ES-5 panel, also available. Contact Timco for more information.
