POWER SUPPLIES HEAVY DUTY SERIES

These super-rugged DC power supplies are ideal for powering 12 and 24 volt communication/ navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise free output and long service life.

FEATURES

  • Excellent Regulation and Ripple Spec: Output voltage maintained within 1% under all rated line and load conditions
  • Polyurethane conformal coated PC board and corrosion resistant heavy duty aluminum case with integral shock mounts assures survival in hostile environments
  • Heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation
  • Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload and input/output fusing
  • Thermally activated cooling fan on “CD” units
SKU: N/A Category:

Description

Specifications

Input Range

105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VAC

Operating Temperature

Standard Units 0-50°C, Derate Linearly From 100% @ 40°C To 50% @ 50°C Thermal shutdown @ 85°C Case temperature

C.D. Units 0-65°C, Derate Linearly From 100% @ 50°C To 50% @ 65°C Thermal Shutdown @ 85°C Case temperature

Duty Cycle

Intermittent: 20 minutes max on time, 20% duty Continuous: 24 Hours/Day 100% Duty

Options

  • Modify for use as a Battery Charger
  • Output voltage adjust (see Output Voltage for range)
  • Transfer relay for back-up battery in event of power failure (ERC option)

Output Voltage

12 V Models: 13.6 VDC (Internally adjustable 12.6-14.5 VDC) Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input)

24 V Models: 24.5 VDC (Internally adjustable 21-27.5 VDC) Ripple: 70mV P-P (@ 110-125 / 220-250 VAC input)

Regulation All Models: 1% Line and Load (@ 110-125 / 220-250 VAC input)

Mechanical

  • Powder coated aluminum heat sink case
  • Front panel terminal block
  • Heavy duty mounting flange
  • Conformal coated PC board
Nominal Maximum Input Current Output Amperage Case Size Weight
Model Input/VAC @115 @230 Intermittent Continuous Ref. Lbs. Kg.
12 Volt Output
115-12-8 115/230 2.5 1.5 8 5 P-1 10 4.5
115-12-20A 115/230 5.5 2.5 20 8 P-2 20 9.1
115-12-35CD 115/230 7.5 3.5 35 35 P-3 32 14.6
24 Volt Output
115-24-10 115/230 5.5 2.5 10 4 P-2 20 9.1
115-24-18CD 115/230 7.5 3.5 18 18 P-3 32 14.6
115-24-35CD 115/230 12.5 7.5 35 35 P-4 60 27.3
Case Size
Inches Centimeters
H W D H W D
P-1 6.0 4.6 8.5 15.2 11.7 21.6
P-2 5.7 4.8 16.3 14.5 12.2 41.4
P-3 6.5 9.5 14.0 16.5 24.1 35.6
P-4 6.5 13.0 18.75 16.5 33.0 47.6

Option: Extreme Vibration Mounting Kit

The Extreme Vibration Mounting Kit is available to protect power converters from the extreme stresses of shock and vibration when mounted on high vibration vehicles.

The kit (pictured here) replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a “super shock absorber” for electronics in high-vibe applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT-L tor units which weigh 2-15 lbs. and Kit-H for units which weigh 16-70 lbs.