ELECTRIC MOTOR CONTROLS

UL, IEC or CSA Recognized Components Throughout.

Steel Enclosure NEMA 4 rated (watertight) keeps dirt and water out. Approved for most outdoor applications.
Pendant Control Switch NEMA 4X rated (watertight), on 50-foot cord, allows operator to stand away from winch during operation. Pendant control is operated with momentary contact-type push buttons. Cord lengths of less than 50 feet are available, please specify when ordering.
Reversing Contactor is electrically and mechanically interlocked to deliver smooth reversing control.
Thermal Overload Relay trips power OFF to protect motor from overheating. Switch is manually reset.
Fused Control Circuit powers pendant with 115 volt, 2 amp current to help protect against high voltage shocks.
Wiring Diagram is supplied inside enclosure.
Steel Mounting Bracket secures control box to winch.

Category: Winches

Description

Maximum Rated Motor Horsepower For Power Supply Current
Model No.	115/1/60	230/1/60	208/3/60	230/3/60	460/3/60	Approx. Ship. Wt. (Lbs.)
EL 4017	To 1 HP	–	–	–	–	25
EL 4023	To 1.5 HP	–	–	–	–	25
EL 4018	–	To 2 HP	–	–	–	25
EL 4024	–	To 3 HP	–	–	–	25
EL 4019	–	–	To 3 HP	–	–	25
EL 4026	–	–	To 7.5 HP	–	–	25
EL 4027	–	–	To 10 HP	–	–	25
EL 4028	–	–	To 20 HP	–	–	25
EL 4020	–	–	–	To 3 HP	–	25
EL 4029	–	–	–	To 7.5 HP	–	25
EL 4030	–	–	–	To 10 HP	–	28
EL 4031	–	–	–	To 20 HP	–	28
EL 4052	–	–	–	To 30 HP	–	60
EL 4021	–	–	–	–	To 3 HP	25
EL 4032	–	–	–	–	To 7.5 HP	25
EL 4033	–	–	–	–	To 10 HP	28
EL 4053	–	–	–	–	To 20 HP	60
EL 4054	–	–	–	–	To 6 HP	60

Single Speed Reversing Magnetic Controls for 1- and 3-phase motors up to 40 HP.

Options:

None.