TRAWLER FENDERS
Model 180
Easy-to-install, weld-on trawler fenders provide Hull and Trawl Door protection and eliminate door impact noise and abrasion. Our rubber provides increased protection over steel half rounds.
Bolt-on models are available for fiberglass vessels.
Short trawl fender pads can be welded to deck and just inside rail to support trawl doors while not in use. Decreases trawl door damage and deck damage.
We Need Measurements
Please specify hot rolled, cold rolled, alloy or stainless steel construction. Aluminum and hot-dip galvanizing also available.
Description
Compressed rubber pads and steel bars or rods are totally enclosed with 3/8” steel plate to form an integrated steel box which is welded directly to knee.
Fully integrated weld-tabs every 12” allow quick and easy installation.
| PART NO. | A | B | C | WT. (Lbs per Linear Ft.) |
|---|---|---|---|---|
| SR 142 and SR 143 |
4” | 4” | 12” to 240” |
10 |
| 4” | 5” | 11 | ||
| 4” | 6” | 14 | ||
| 4” | 8” | 20 | ||
| 4” | 10” | 26 | ||
| 10” | 27 | |||
| 12” | 32 | |||
| 6” | 6” | 23 | ||
| 6” | 10” | 36 | ||
| 6” | 12” | 38 |
Laminated rubber sections are compressed onto 3/4” steel rods.
None.
None.
