TURBINE FUEL FILTERS – 500MA

500MA

Basic Model
60 GPH
Add ’M’ for metal bowl
Example: 500MAM

P

Water Probe¹
Add ’P’ for an in – bowl water probe.
(Omit if not desired)

10

Element Filtration Rating.
Specify one: ’2’ for 2 micron ’10’ for 10 micron or ’30’ for 30 micron

¹Must be used with Water Detection Kit.

Category: Controls/Engine Room

Description

Mounting Hole Pattern

Refer to Turbine Series introduction page for filter dimensions

Performance Graphs

These results are from controlled laboratory tests. Field results may vary by application.

Item	Part No.	Description	Case Qty.
1	RK11888	T-handle	1
	11350	T-handle O-ring	10
2	RK15078	Lid	1
3	15005	Lid Gasket	10
4	RK15377-01	Body, 3/4″-16 UNF Ports (MA, effective 1/15/96)	1
	RK15082	Bodv. 9/16″-18 UNF Ports (prior to 1/15/96)	1
5	RK15090	Mountinn Bracket. unitized with Bowl Ring (MA)	1
6	15374	Bowl Gasket (supercedes 15009 0-ring-All models)	10
7	RK15013D	Turbine Centrifuge/Conical Baffle	1
8	RK15279-01	See-thru Bowl w/Water Probe Plug, (MA)	1
	RK15301-01	Metal Bowl w/1/4″ NPT Drain & Water Probe Port	1
9	RK151041	Heat Deflector Shield (MA)	1
10	RK210692	Water Probe Assembly	1
11	RK20022	Metal Water Probe Port Plug	1
12	11340	Drain Fitting O-ring (New Style)	1
13	11041	Bowl Drain Washer (New and Old Style)	10
14	RK19492	Diesel Marine Shut-off Valve Kit	1
15	RK15300	Mounting Bracket, 3-piece (MAM)	1
16	918-N4	Bowl plug 1/4″ NPT (Old and New Style)	1
17	11-1910	Bowl Drain Fitting (New Style)	1
	RK11-1910	Complete Bowl Drain Fitting Kit (New Style)	1
	11040	Bowl Drain Fitting (Old Style)	10
18	RK15010B	Check Ball w/Seal	1
19	RK15081-013	Phillips Head Cap screws 10-24×1″ (4)	1
	RK150813	Hex/Washer Head Cap screws 10-24×7/8″ (4)	1
20	2010SM-OR2	Micron Element w/Seals	12
	201OTM-OR10	Micron Element w/Seals	12
	201OPM-OR30	Micron Element w/Seals	12
21	RK15079	Return Tube (w/tapered pipe base threads)	1
22	RK15211	Seal Service Kit (all models – not shown)	1
	15335	Installation Instructions, 500MA

1 For diesel service only. Must be used with a Water Detection Kit.
2 For replacement only. The Coast Guard does not accept “FG” units converted to “MA” configurations.
3 Units built prior to Fall, 1998

Replacement Service Elements

For all Model 500 Series

SERVICE ELEMENT INCLUDES LID SEAL AND T–HANDLE O–RING.

2010SM-OR 2 Micron (Brown end caps)
Recommended for Final/Secondary Filtration

2010TM-OR 10 Micron (Blue end caps)
Recommended for Primary or Secondary Filtration

2010PM-OR 30 Micron (Red end caps)
Recommended for Primary Filtration* Only.

*A secondary/final filter is required downstream.