STRETCHERS

BASKET TYPE / PLASTIC STRETCHERS

Junkin pioneered the development of the Splint Type-Basket Stretcher which led to the outstanding Series 300 Stretchers, the most efficient and practical products of their kind on the market. Made of steel, all welded rigid construction which does not rely on injured person to attain form or rigidity. Light in weight and ample in size. Available in six models with supplemental accessories to facilitate special handling needs.

Plastic stretcher details below.

SKU: N/A Category:

Description

BASKET TYPE STRETCHERS

JSA-300 Lightweight Basket Type Stretcher

Nylon web straps at chest, abdomen, thigh, and calf. Adjustable footrests for vertical lifting. Frame is 5/8” steel tubing; cross braces and runners 3/16” x 3/4” flat steel. Basket is 18 gauge, 1” hexagon mesh netting.

DIMENSIONS: 80-1/2” L; 8” H


JSA-300A Lightweight Basket Type Stretcher

Same as the JSA-300 with the addition of a wood rack through back of trunk section and a strap adjusted foot rest.

DIMENSIONS: 80-1/2” L; 8” H


JSA-300-B Break Away Stretcher

Designed to rescue injured persons from locations where lengthy foot travel is mandatory. The stretcher breaks into two halves which can be back-packed to the point of rescue and assembled in seconds. It can be secured to a standard back-pack for carrying. Three positive lock clamps secure two halves together. Four 60” web straps are standard. Stores in space 44” x 12” x 24”.

WEIGHT: 34lbs.  Can Ship via UPS


Without Leg Divider: JSA-300-W

Designed to accommodate most standard 16” x 72” full length backboards.

ALSO AVAILABLE WITH PLASTISOL COATING (JSA-300-W PC).


MIL-8131-W Military Basket Stretcher

Constructed of lightweight 3/4” stainless steel tubing. Built to U.S. Military Spec. RR-L-1997 and MIL-L-37957. Available with or without leg divider, Plastisol coated or breakapart.

DIMENSIONS: 84” L x 24” W x 7 1/2” H


PLASTIC STRETCHERS

JSA-200 Plastic Stretcher

Yellow high-density polyethylene shell, supported by a stainless steel outer rail, permanently attached with stainless steel semi-tubular rivets. Features molded runners, fully exposed outer rail, non-absorbent foam pad secured to stretcher and four patient restraint straps. Ideal for unusually rugged rescue situations such as industrial, mining or construction. Patent Pending.

DIMENSIONS: 84 1/2” L; 24” W; 7 1/2”


JSA-200B Break-Away Plastic Stretcher

The same construction as JSA-200. Designed to rescue injured persons from locations where lengthy foot travel is mandatory. The stretcher breaks into two halves which can be back-packed to the point of rescue and assembled in seconds. Positive-locking quick-release pins secure two halves together. Four straps are standard.

DIMENSIONS: 84 1/2” L; 24” W; 7 1/2”


JSA-300CS Confined Space Stretchers

The new 19” width Confined Space Splint Rescue Stretcher has been designed for rescues where space is confined. With steel, all-welded rigid construction, which does not rely on the injured person to attain form or rigidity. Light in weight and ample in size. The basket is 18 gauge, 1” hexagon mesh netting. Nylon web straps for securing at chest, abdomen, thigh and calf. Supplemental accessories to facilitate special handling needs are available.

DIMENSIONS: 81 1/2” L; 18 3/8” W; 7 3/4” H


JSA-400 Aluminum Break Apart Stretchers

Designed to gently maneuver stretcher under patient without rolling or lifting. The immobilization of the patient in the position found, minimizes the risk of complicating the existing injuries. The center of the stretcher can be opened to allow the patient to be X-rayed while secured on the stretcher. Features include sturdy, lightweight aluminum construction with an adjustable length and three patient restraint straps. Folds for easy storing and separates in half during application and removal.

DIMENSIONS: 66 1/4” L; 17 1/2” W; 2 5/8” D;
Folded: 49 1/2” L; 3 1/2”D; Adjustable to 80”