LFA-S
Portable Alarm Panel
The LFA-S High Level/Overfill Liquid Level Sensor is USCG accepted and satisfies 46CFR 39.2009 (a) 2 requirements as part of your barge Overfill Prevention System when installed in accordance with 46CFR 111.105 for Hazardous Locations.
Rugged Construction / Reliable Performance
All stainless steel construction for mounting on a STD 8” flanged spool piece, typically 6”H. The 316SS float is rated for pressure up to 120 PSI, and for light Cargo Viscosity down to 0.6 SG! The Timco buoyant float design insures there is little to no Alarm Set Point variance with different SG Cargoes. Our UL Listed Hermetically Sealed NC latching Reed Switch provides long life and is interchangeable with all Level alarm sensors.
Simple Design
Intuitive Lift to Test Rod with rod seal and weather cover make it easy for Tankermen to test prior to every loading as required. The large SS weathertight junction box with Nickle plated Brass wire grip seals out moisture extending switch service life. Tested, serialized, with HL/OF Setting clearly stamped into the flange data tag, expect years of trouble free service and safety with the LFA-S on your barge.
LFA-S
Dimensions
Dimensions
8” mounting flange, typ. 6” H. Height varies, as shown: 28.5”x8”x8” (LxWxD).
CUstom Specifications
HL/OF settings can be suited to customer need. When ordering Model LFA-S sensors confirm: deckmount flange HT (typ 6”), HL + OF Level settings, maximum cargo temperature, and minimum cargo specific gravity.
All products proudly manufactured by Timco Industries for you
Superseal™ Reach Rod Stuffing Box, VPI’s, Handwheels, Reach Rods, Yokes & Deck Stands, Radar Gauging w/ Local Display & Programmable Alarms, Radial Arm Gauge Trees, Top Off Paddles, Flame Screens
